The ESSEX PTLOX PORTABLE LIQUID OXYGEN SYSTEM is a low pressure portable 10 liter liquid oxygen storage and gaseous delivery system also known as ESSEX CRYOGENICS CRU-87/U OXYGEN CONVERTER. About the PTLOX (FDA Life Support device 510(k) number K880183):
What’s Included with the Attached CRU-50/A Fill Valve Accessory Kit (P/N 50C-0021-0001-1):
The ESSEX PTLOX PORTABLE LIQUID OXYGEN SYSTEM Weighs in at 50 pounds when empty or at around 80 pounds when full. Portable, the PTLOX can be carried by one or two people or mounted in vehicle, vessel or aircraft.
SPECIFICATIONS
This Device by Essex is a CONVERTER-STORAGE UNIT used to SUPPLY OXYGEN ON A THERAPEUTIC BASIS (PURITY of 93-100%) TO A MAXIMUM OF THREE (3) PATIENTS AT A RATE OF 15 LITERS PER MINUTE (15 LPM).
Capacity: 10 Liters
Dimensions (W”xL”xH”): 18.2 x 20 x 24
Weight, Full: 80 lbs
Weight, Empty: 55 lbs
Total Gaseous Volume: 8,600 Liters
Flow Rate: 45 LPM
System Internal Pressure: 85-120 PSIG
Delivery/Outlet Pressure: 50 ± 5
Operating Temperature: 40° F to 140° F
Part Number: 50C-0021-1
NSN Number: 3655-01-222-9494
PTLOX PORTABLE LIQUID OXYGEN SYSTEM
The device addresses the dangers associated with bagging patients and frees up a responder to address other injuries, perform compressions, attend to other patients or further assist in transporting the patient.
The SAVe is a hands free, compact, lightweight and solid ventilator with alarms and safety features, not found elsewhere at its price. It uses a pump to deliver a 600ml tidal volume and fixed respiratory rate of 10BPM, in compliance with the American Heart Association, reducing operator error and eliminating the guesswork associated with bagging a patient.
The SAVe accepts supplemental low pressure oxygen but does not require compressed gas to ventilate the patient. Ventilation can be provided through the included mask or the SAVe can be connected directly to an endotracheal tube or other airway adjunct. The SAVe operates up to 5.5 hours on a single battery charge and may be recharged from a standard AC outlet. It’s a set flow, time cycled, volume targeted, pressure limited (38 cmH2O) device. The SAVe is perfect for the needs of field medics, mass casualty incident coordinators and EMS professionals.
HERE IS WHAT IS INCLUDED
FREE Training Slides for the AutoMedx SAVe Simplified Automated Ventilator
The ventilator is completely self-contained, weighs only 3 pounds and does not require a compressed gas source. It can be used with a mask or a secure airway. Low pressure supplemental oxygen can be used if desired. The SAVe will deliver ambient air for up to 5.5 hours on a single battery charge and may be recharged from a standard AC outlet. It is a set flow, time cycled, pressure limited (38 cmH2O) device.
Parameters:
Ventilation Mode: Positive Pressure ventilation
Tidal Volume: 600ml
FIO2: Ambient air (21%) or supplemental oxygen (21 to 62%) Peak Inspiratory
Pressure: 38cmH20
Inspiratory / Expiratory Time: 2.25 seconds / 3.85 seconds
Breathing Rate: 10BPM (fixed)
Alarms: Low pressure (disconnect), High pressure (blockage) and Low battery.
Alarm Mute: Yes (on – off switch)
Operating Time: 5.5 Hours on Lead – Acid rechargeable battery or continuous on AC power
Dimensions: 16.5 x 16.9 x 6.3cms
Weight: 1.3kgs (Ventilator)
The AutoMedx SAVe Simplified Automated Ventilator 600X10 (SAVe) mitigates the potential for injury, reduces operator error, complies with guidelines and improves a medical responder’s ability to perform other critical task. It is ideally suited for situations where the use of pressurized gas is inadvisable or unavailable, or where size, weight, ease of use and portability are a consideration. Forward deployed field medics, mass casualty incident coordinators within the Department of Homeland Security and EMS professionals will find the device well suited to their needs.
Which comes with the ROLL STAND KIT for WELCH ALLYN PROPAQ by GCX Instrument Mounting Systems (MPN: DU-PR-0013-04) already mounted and installed. FREE SHIPPING
Includes:
Motion Tolerant Monitoring
Welch Allyn’s patented Smartcuf® NIBP available with motion-tolerant pulse oximetry (SpO2) technology from Masimo® or Oximax® technology from Nellcor. Accurate readings during motion or low perfusion lead to more informed treatment decisions, fewer nuisance alarms and quicker readings save valuable time. Ideal for transport, pediatric, shivering or shock patients
Outstanding Quality and Value
Unmatched durability: Engineered to withstand shock up to 50g. The preferred monitor for air transport programs and military agencies around the world. Just a few of the Key Quality and Value points:
Propaq Encore 202 EL No Invasive Pressure – See Photo’s for Options Listed on Item
For Available Parts and Accessories for the Welch Allyn Propaq Encore click here.
Welch Allyn Propaq Encore 202 EL was Removed from Working Environment. In Great Condition. Parameters: Non-Invasive Blood Pressure, Temp, ECG, Nellcor SpO2, and Thermal Recorder.
NOT Included: Blood Pressure Hose, Adult or Child BP Cuff, SpO2 Probe, ECG Cable and Leads, or Power Cord. Self-Test Completed with No Issues. Need Accessories to fully test.
The 4 Reasons why you want LOX Patient Oxygen
Reduced weight
Liquid oxygen increases in volume 860 times as it converts from a liquid to a gas. That means a smaller amount of LOX will produce a large volume of gas, reducing weight on the helicopter by eliminating the need for multiple cylinders without sacrificing capability.
Increased space
The same 1:860 liquid to gas ratio that reduces the cargo weight also increases the amount of available space on a helicopter. A single LOX converter eliminates the need for carrying multiple high-pressure cylinders, increasing the amount of usable space while supplying more gaseous oxygen.
Safety
LOX systems have operating pressures under 100 psi, as compared to high-pressure cylinders at 1800-2200 psi. This makes the units less volatile and therefore safer in the event of an accident.
Reduces Operating Costs
Because of the increased capacity, LOX allows a team to fly more missions between refilling which reduces maintenance time spent servicing the system.
What are the typical uses for LOX Devices technology?
The typical use for LOX is to provide breathable oxygen for life support.
There are LOX converters designed to supply oxygen for pilots and crew of transport aircraft, ems helicopters and more.
LOX systems are found on both fixed wing and rotary medevac platforms, where they provide direct support for patients and run oxygen-powered devices, such as ventilators.
Now let’s talk about the Backpack Medical Oxygen System (BMOS), click here for specs which is a portable medical oxygen system that is easily carried into the field and a Vital Part to the Success of the HAA Flight.
The Backpack Medical Oxygen System BMOS is a low pressure, portable 2.0 liter liquid oxygen storage and gaseous delivery system, capable of supplying up to 1720 gaseous liters of oxygen at a maximum flow rate of 15 liters per minute at 50 psig.
A built-in flow control valve delivers oxygen to a single patient at flow rates from 0.5 to 15 liters per minute.
The BMOS has been successfully tested to work in tandem with commonly used ventilators.
Weighing just 19 pounds when full, the BMOS can be carried or worn by parachutists and ground support personnel.
The BMOS requires no external power and uses just six AA-batteries for the quantity indicator.
The system has been tested to MIL-STD-810.
A secondary accessory port can supply 50 psi of oxygen to other medical devices or to an oxygen regulator for a second patient.
Click here for a Comparison on the Backpack Medical Oxygen System BMOS.
The BELMONT RAPID INFUSER or Belmont FMS2000 also known as the Belmont Fluid Management System infuses blood, replacement IV fluids or irrigation fluids warmed to physiologic temperature at userset rates from 10 to 750 milliliters per minute (ml/min). Low infusion rates of 2.5 and 5.0ml/min (150 and 300ml/hr) are also available to keep the venous line open. No heating is provided at these low infusion rates.
Learn more about the BELMONT RAPID INFUSER from the Manufacturers Video which you can watch the video here.
Flow and Temperature Delivered rapidly and Accurately
The system monitors temperature, line pressure, and air in the fluid path to ensure safe operation and alarms at all unsafe conditions. A hardware override circuit prevents unsafe operation in case of system computer failure.
Unique Instant Heater
High Speed Volumetric Pump
We have gone through some of the basics on the BELMONT RAPID INFUSER with the Help modules and screens which direct you on the inserting of the disposable and the different service screens without error. Voltage seems correct and display is as it should resolution wise. Like with any unit of this type, it should always be bio-med tested before putting into service.
The BELMONT RAPID INFUSER or Belmont FMS2000 comes with the 86 Page Manual plus Waterproof Hard Case, Software, and Accessories.
The price we are asking for a working device of this magnitude is way below any wholesale price. Only from acquiring such surplus from the Federal Government and Military Surplus Auctions that we are able to offer this device for such a low low price. This really should be advertised and placed on a larger medical site and ask thousands for it compared to the hundreds we are asking. This is a must buy!
*** THIS DEVICE COST OVER $18,000 BRAND NEW ***
The Essex MODS Mass Oxygen Distribution System is a Portable Liquid Oxygen Converter that stores 75 Liters of LOX Liquid Oxygen. Its primary purpose is to supply Medical Grade Oxygen in Seconds anywhere and at any time. The Essex MODS can be transported either by ground, air or sea to any number of destinations. Not for just emergency situations but, to supply either a few patients or a few hundred patients when the need arises.
Because if you need Oxygen for patients, what better way than to store it in the form of LOX and then just attach to a Patient Distribution Kits for your hospital, facility or emergency setting. The you just have the Portable LOX Converter do its job and supply the needed Medical Oxygen by converting liquid oxygen into patient ready oxygen for patient use.
CLICK HERE TO LINK TO THE MANUFACTURER WEBSITE FOR MORE INFORMATION
| LOX Capacity (Nominal) | 75 Liters |
| Delivery Rate / Durations | 450 LPM at ± 30 PSIG of continuous oxygen flow to multiple patients.
Runs continuously with 2 alternating VGL’s (Commercial LOX storage tanks) connected |
| Dimensions | 54” H x 30” W x 60” L |
| Weight | 550 lbs. max (full) / 360 lbs. Nominal (empty) |
| Temperatures | Operating 32°F to 130°F (0°C to 49°C) Delivery +10/ -20°F of ambient temp.
Non-operating/Storage -30°F to 145°F (-34°C to 70°C) Store Inside |
| Humidity | Operating up to 95% |
| Outlet Pressure | 200 PSIG Nominal |
| Relief Valve Settings System | 330-380 PSIG Safety 380-430 PSIG |
| Optimal Time to Performance | 30 Minutes (after filling) |
| Alarm Warnings | Low Quantity (onboard tank)
Approx. 10% Low Temperature (caution) Approx. 0°F Low Temperature (warning) Approx. -20°F Low Pressure Approx. 100 PSI |
| Battery | Six (6) 1.5V Alkaline C-Size (for warning system) |
THIS ITEM IS READY TO BE SHIPPED!
BUY IT TODAY!
The HotPac™ generates deep moist heat which delivers increased advantages over dry heat to relieve chronic pain, acute muscle strains and general musculoskeletal discomfort. Unit will hold 12 Hotpac’s of standard size (NOT INCLUDED).
Chattanooga Mobile Heating Unit Chattanooga M-2 Mobile Hydrocollator® (MPN 2402)
HotPac™ Capacity 12 Standard (10” x 12”) Hydrocollator® HotPacs™ (MPN 1006) (NOT INCLUDED)
Power Supply 110-120 V~
Rated Frequency 60 Hz
Tank Capacity 68.81 Liters
Filled Weight 110 kg (190 lbs.)
Temperature Range 160° F – 165° F (71° C – 74° C)
Thermal Cut-Out Temp 190° F ± 14° F (88° C ± 8° C)
Heat Up Time Time to 160° F (70° C) – 6 Hours
Cool Down Time Time from 160° F (70° C) – 3 Hours
Safety Class Type B
Safety Tests UL 544
Dimensions 33 in H x 27 in L x 16 in W (85 cm H x 67 cm L x 40 cm W)
Product Weight 86 lbs. (39 kg)
Shipping Weight 93 lbs. (42.2 kg)
The BCI 3303 Hand-Held Pulse Oximeter facilitates spot checking and continuous SpO2 and pulse rate monitoring for home-care use, as well as at the hospital bedside or for land or air transport situations. Stores data for later sleep screening analysis via a PC or commercially available printer. It’s precisely the kind of reliable performing device you’d expect from the global leader in hand-held pulse oximetry technology.
INCLUDED WITH YOUR PURCHASE
3303 BCI International 3303 Hand-Held Pulse Oximeter (MPN 72042A1), BCI 3303
3078 Reusable Ear Sensor,
3043 Reusable Universal “Y” Sensor,
3359 Analog Output Adapter,
3044 Finger Sensor,
3311 Oximetry Cable,
3049 Microfoam Adhesive Strips,
3353 Protective Boot, NiMH Battery, AC Power 105-125 VAC, 60 Hz
FEATURES:
TECHNICAL SPECIFICATIONS | DISPLAYS, INDICATORS AND KEYS
SPO2
PULSE RATE
MEMORY
DIMENSIONS
WEIGHT
POWER REQUIREMENTS AC POWER
BCI 3303 HAND-HELD OXIMETER – BCI INTERNATIONAL 72042A1
US Military – Government Procurement/Surplus Item – Nomenclature Contract for BCI 3303 Pulse Oximeter PAID $1,374.79 (Form 1348-1A Receipt Document)JULY 18TH 2016 – LAST ONE IN STOCK
The Bird 3800 Air-Oxygen Microblender comes complete with Hoses, Filter, Manual 03800A Kit and flowmeter as seen in photos. This is a High Flow Bird Blender. The versatile Bird Blender High Flow features delivery of accurate FiO2 mixtures from two outlet ports and has an overall flow range of 2 to 120 LPM. It is ideal for when high demands of blended gas are required.
The MicroBlender is a lightweight, compact, air-oxygen blender that provides precise mixing of medical-grade air and oxygen. The MicroBlender provides oxygen concentrations from two gas-outlet ports.
| Cat. no. | 03800A |
| Dimensions | 3.5×3.4×3.6” (89x86x91 mm) |
| Weight | 2.75 lb (1.25 kg) |
| Sensor accuracy | ± 3% O2 |
| Supply pressure | 30 to 75 PSIG/2.1 to 5.3 kg/cm2 |
| Alarm activation bypass | When supply pressures differ by 20 ± 2 PSI |
| Number of ports | Two |
| Overall flow range | 2 to 20 LPM |
| Bleed flow | 10 to 20 LPM when activated |
The Nonin Onyx II 9550 was created as an upgrade for the popular 9500. This digital fingertip pulse oximeter makes it possible for anyone to carefully monitor their blood saturation levels and pulse rate. The Onyx II Nonin 9550 offers many improvements over the original 9500 design, including approximately 800 more spot checks for each batch of two AAA batteries.
Keeping your oxygen levels and pulse rate in line are important for proper health – especially in the military – and this unit will help alert you to any potential problems before they become a major issue.
The portability and functionality of the Onyx II make it a valuable tool in any situation where a fast and accurate reading of blood oxygen saturation and pulse rate are needed. Never search for a pulse oximeter or sensor again.The Nonin Onyx II 9550 is so durable and reliable that the Military accepts nothing but the Nonin! Rugged enough to be used in the most demanding situations. That’s why it carries the US Army and US Air Force aeromedical certification for use in helicopters.
